Slide Abutment Rotary Compressor Conversion

Slide Abutment Rotary Compressor Conversion
Peter Singfield, Belize, December 2005

Photo #1
The sliding abutment rotary compressor -- converting it to a rotary engine??

1st -- why bother -- they already believe they have the perfect device -- the scroll compressor!!

Or if your rich -- the turbo extractor.

So why bother??

Well -- here is the review to why.

There is a total lack of understanding among these list members that I am about to present this "paper" to about expansion ratio and super heat.

No matter how hard I attempt to paint that picture -- nobody can see the presentations -- so be it.

Consider this -- from now on -- pure black magic then -- OK??

Black magic point #1:

In any liquid to vapor thermal power transaction your over all efficiency increase the mo0re you can super heat the vapor part -- over and above boiling.

One adjusts super heat in the boiler -- by the maximum temperature of the exiting vapor state -- and by the "density" of that vapor state.

Ergo -- if I boil water at 50 psi -- 281 F -- then pass that steam -- through a super heater -- raising the final temperature to 800 F -- but keeping the pressure still at 50 psi -- I have added energy as only "superheat"

OK -- Black magic #2:

To extract in full efficiency that extra energy packed into the super heat one needs high expansion ratios!!

If no high expansion ration -- no extraction -- the heat goes out to the condenser side -- efficiencies "suck" (nice pun - -eh??)

Those big steam powerplants with their incredible over all system efficiencies get those by following this "magic" -- OK??

The expand steam through many stages - -and these turbines have to be specifically designed for one state of steam -- for ever!!

That all being a very complicated and very expensive process -- ergo -- you can't do it "small" --

However -- "history" shows us it can be done -- and even better than in a turbine -- using the Uniflow steam engine design.

What is a Uniflow??

A single stage expansion unit where vapors expand from full pressure to below ambient (vacuum on condenser) all in one "expansion" and all in one direction!!

(Oh my -- more heavy black magic you all have to accept -- eh??)

Just remember but one thingy -- this magic is proven to work -- over and over again.

Since it is impossible to get you to understand the very real science about all this -- please just have good faith and accept it as black magic. I will answer no arguments on this subject from any of you -- accept is working "magic" -- or -- simply put -- delete all my further messages on this subject!!

Now -- the golden grail -- the ultimate magic wand -- scepter -- so to speak -- is a device that can achieve 20 to 1 or better expansion ratios in one pass!!

The old style uniflow reciprocating engines can do exactly this.

The sliding abutment refrigeration compressor will also do 20 to one or more expansion ratios!!

Now -- another word of advice -- all of those acolytes out there that have already sold their souls to the scroll compressor -- with it's maximum expansion ratio od but 3 to 1 -- please -- delete all my me4ssages that will be coming down the tubes!!

As they will only drive you in a crazy frenzy of spouting dumb-ass comments that will distract further investigation of the magic along the same lines as just happened to Doug and his presentations.

Further -- let me warn all of you younger "sorcerers" -- like Doug -- my time is limited to "waste" -- so I have a spell on my inbox that deletes all messages from people I assign at server level -- they don't even reach my computer -- so there!!

That means these "demons" can shout and post a knash their teeth and try everything -- but it all ends up my not even knowing it -- cause they have been "banished"!!

I could show this magic to Doug --

Now -- find file attached a first picture of this basic unit we are going to literally open up and explore --

and one last time -- remember -- even look at this a tiny little cross-eyed

-- and you be banished!!

For most of you out there -- I already know this magic is beyond you abilities to ever comprehend -- so don't test me in regards to teaching you the spells of it -- I know you are no capable yet -- though maybe in time

-- you could learn -- but to learn -- you need open your minds -- and in this modern world of inferior magic -- that I do not expect to occur.

For the few adepts out there that can "learn" -- follow well these postings

-- it leads to great enlightenment!!

It also leads to the perfect -- small -- cheap -- highest efficiency "ORC" --

But not steam -- as this magical machine depends in operating in an oil bath for lubing and sealing -- works with refrigerants -- but not with steam.

Sorry -- but that is how this cookie crumbles!!

I have already posted full details of manufacturer and supply of this magical machinery -- those that were so foolish to have deleted that information -- tough titties.

But take my word for it.

The unit is designed to work to 400 F and 600 PSI pressures!!

Here is the picture -- the unit in original configuration was powered -- as a refrigerant compressor -- by a 3.3 kw electric motor -- so it should be just as well to consider as a 3.3 kw ORC prime mover -- at 3600 RPM.

Oh -- it weighs in at: 9.5 lbs

In this picture -- your looking into the intake port - -as compressor -- which will be exhaust as "Magical Prime Mover" --

In the following times I will take this device apart -- showing the deep "magical" functions -- so stay tuned.

and all you young turk "Demons" -- get thee behind me or you shall be "BANISHED" using the most secure spells you can never undo!!

Last -- I have CC's this to a fellow "sorcerer" that specializes in the "Magic" of gasifiers. I do hope he at least "lurks" - -as in the end -- I will be demonstrating how this present Magic can be joined with his Magic to make a device of unlimited potential to produce (Gasp!!) POWER!!

By using a cheap -- common -- catalytic converter -- which another fellow Sorcerer has already cast the spells on and proven as new "magic" that works in directly converting producer gas to heat -- at 94% and greater efficiencies -- plus "eating" the tars and spitting those out as heat to!


PHOTO #2

OK -- we now take off the back cover and our first glance of the insides of this mystical -- magical -- device.

The codes of this developing "spell" in prime mover mode:

A: Exhaust

B: Intake

C: Sliding abutment

D: Cam

E: Wobble Ring

F: Crank Shaft

Notes --

1: Rotation is counter clock-wise

2: This is beginning of stroke -- just after pop-valve has closed

3: You can almost see the size of expansion volume involved -- but later pictures will bring that home much clearer.

Next in the series will be further along the power stroke -- full expansion.

We will then continue dismantling working components so all can get a clearer understanding of how this "spell" works.

For those nay sayers -- never forget -- this spell is a working model -- probably millions of these spells have already been cast and functioned -- for exceedingly long periods -- reliably -- through the most mighty magic of all -- "MASS-PRODUCTION"!!


Photo #3

This picture shows what the end of the power stroke looks like. I have not bothered putting in the little arrows -- you should already know what is what.

The Wobble ring is now over the exhaust port -- but soon to expose it -- the power stroke has reached full expansion -- note the volumes involved -- not at all the scroll magic -- much more powerful!!

As the wobble ring "contact-point" continues it passes through/under the sliding abutment -- then past the intake port -- another "pop" -- and next stroke to "full" expansion is achieved.

The wobble ring does not spin -- or rotate -- it simple impinges on out cylinder wall in a rotray fashion changing chamber configeration as cam rotates -- there is no rolling friction between sliding abutment and wobble ring --

One has friction on cam lobes inside wobble ring -- and some on sides of sliding abutment. Plus main crank journals at each end.

However -- these be "simple" type friction points and well lubricated.

When has anyone on this list needed to change a camshaft or lifter in their engines??

Very ancient -- proven -- magic.

Though the young acolytes believe they know better "newer" magic -- I have great faith in proven ancient magic.


Photo #4

Final in this mini series -- all parts "out" and identified --

One typo -- not time to do it all over and change it.

The "G" should be a "D"

Here are the "codes" -- again:

A: Exhaust

B: Intake

C: Sliding abutment

D: Cam

E: Wobble Ring

F: Crank Shaft

Now -- if you can't figure this device out from what has been presented -- you are not made of the right stuff to study "magic" -- give it up -- eh??

Note -- the cam does not impinge on wobble plate as a cam does on a lifter

-- but has full surface contact at all times -- it is a wobbler -- more than a cam.

The sliding abutment does behave exactly as a lifter -- though.

Thus dividing the chamber into two sections.

This folks is poetry in motion -- simplicity of design at it's best - -and as such is probably not of any value to the young acolytes with their scrolls -- who prefer complication above all else -- and worse -- can't understand "expansion"!!

They thus have dismal over all efficiencies in their spells and enchantments.

Again -- this is the enchantment that can liberate power to the world's people during their extreme time of need using the magic of partial combustion devices in a most reliable, economical -- least complicated -- manner.

The other parts of this "spell" are in regards to boiler -- feed pump -- container -- drive connections -- condenser.

All of which are easily achieved using conventional -- well proven -- spells.

It is just this -- the heart -- the prime mover -- that has been presented!

For those that have so patiently been waiting for these mystical revelations -- sorry for the delay -- now -- sit back -- study -- enjoy.

I might actually build a working prototype -- but only sometime after these present pagan ceremonies are ended.

(Yes -- they definitely are "pagan")

Merry Paganism and all -- eh??

Peter / Belize
Turneffe Coconut http://turneffecoconut.com/index.html

3